1050 Brands 3181 Models 21609 Galleries 13543 Typefaces 6273 Patents
Home » Facit » 1620 » 1974 #910029
1974 Facit 1620 Serial # 910029 1974 Facit 1620 typewriter, Serial # 910029 JohnPaul Williams's 1974 Facit 1620 typewriter. 2022-07-30 From the Virtual Typewriter Collection of JohnPaul Williams: 1974 Facit 1620 Serial # 910029 I'm not sure about the date on this as the serial number reference on this site doesn't seem to go up this high. I assume that it was manufactured around 1975. I managed to get a 'seized up' unit for cheap on eBay with the leather "made in Sweden" case and manual. It appears to have had very little use.

Type-face appears to be PICA Esquire (10 pitch).

After a clean and quick service, it appears to be a very smooth machine. There was a somewhat rusted "Facit 1620" label mounted to the front which I removed and may add back later -- but I'm tempted to keep it as it is (a much sleeker and clean look). Good news for those who get this, naptha/lighter-fluid can be used on the crinkle finish as it appears to be some kind of powder coating. Test on yours first, but it was fine for cleaning this model.

This example has the 13" wide platten so you can write landscape - but it seems to have some issue with its tabulation system. I can reset tabs, but I can't seem to set them (in either mode). Will have to take it apart and investigate further, but I presume something else has seized up and will need to have the old grease flushed and re-oiled.

1974 Facit 1620 #910029

Status: My Collection
Hunter: JohnPaul Williams (jaype)
Created: 07-30-2022 at 02:37PM
Last Edit: 07-30-2022 at 04:52PM


Description:

I'm not sure about the date on this as the serial number reference on this site doesn't seem to go up this high. I assume that it was manufactured around 1975. I managed to get a 'seized up' unit for cheap on eBay with the leather "made in Sweden" case and manual. It appears to have had very little use.

Type-face appears to be PICA Esquire (10 pitch).

After a clean and quick service, it appears to be a very smooth machine. There was a somewhat rusted "Facit 1620" label mounted to the front which I removed and may add back later -- but I'm tempted to keep it as it is (a much sleeker and clean look). Good news for those who get this, naptha/lighter-fluid can be used on the crinkle finish as it appears to be some kind of powder coating. Test on yours first, but it was fine for cleaning this model.

This example has the 13" wide platten so you can write landscape - but it seems to have some issue with its tabulation system. I can reset tabs, but I can't seem to set them (in either mode). Will have to take it apart and investigate further, but I presume something else has seized up and will need to have the old grease flushed and re-oiled.

Typeface Specimen:

Hunter: JohnPaul Williams (jaype)

JohnPaul Williams's Typewriter Galleries [ My Collection ] [ My Sightings ]

Status: Typewriter Hunter
Points: 14

Keen on bashing the odd word down, and owner of more than four typewriters...



RESEARCH NOTE: When researching the Facit 1620 on a computer with lots of screen real estate, you may find that launching the Facit Serial Number page and the Facit 1620 By Model/Year/Serial page in new browser windows can give you interesting perspectives on changes throughout the model series.